Chemical Profile (Chemicals tab)
After your 'Pool Profile' is set up, you will have to upload your chemicals to your 'Chemical Profile.' You will have the option to select from the list we have put together or scan the barcodes on the products they have.
NOTE: You can skip this and come back later if you need to. However, chemical recommendations will not populate until the Chemical Profile is completed.
The 5 types of chemicals you will need are:
- Primary Sanitizer
- Secondary Sanitizer
- pH Increaser
- pH Decreaser
- TA Decreaser
You can scan the barcode on your products, or you can click "Choose your product types" under the "No Barcodes?" option.
Primary Sanitizer
This can be a variation of different chlorine products, calcium hypochlorite, or a saltwater generator.
Secondary Sanitizer
The secondary sanitizer can be a number of options, usually pool shock, di-chlor, calcium hypochlorite or a non-chlorine pool shock.
pH Increaser
This is usually going to be a sodium carbonate so there is only one option.
pH Decreaser
This will usually consist of a dry acid, or a muriatic acid.
Alkalinity Increaser
This is going to be a sodium bicarbonate.
When you're done here, it's time to start the setup!
Click here for the next step.